[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Get usage advice, brochures, trouble shooter, service information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. [. . . ] How to set the rinse aid level Make sure the appliance is in user mode. The display shows the current From 0A to 6A where level 0A means no rinse aid is used. During the drying phase, the door opens automatically and remains ajar. Do not try to close the appliance door within 2 minutes after automatic opening. If, afterwards, the door is closed for another 3 minutes, the running programme ends. To improve the drying performance refer to the XtraDry option or activate AirDry. If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. The display shows the current This option allows to set and save the most frequently used programme. How to save the MyFavourite programme And until the indicators of the selected programme and options flash for a few seconds. How to set the MyFavourite programme Press and hold until the indicators that are related to the MyFavourite programme and options are on. Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. The Option button toggles between the available options and their possible combinations. If you select non compatible options, the appliance automatically deactivates one or more of them. If an option is not applicable to a programme, the related indicator is off or it flashes quickly for a few seconds and then goes out. Activating options can affect the water and energy consumption as well as the programme duration. The TimeSaver allows to reduce the duration of a selected programme by approximately 50%. The washing results are the same as with the normal programme duration. by default , TimeSaver is off , but it is possible to activate it manually. This option provides better hygiene results by keeping the temperature at 70 °C for at least 10 minutes during the last rinsing phase. Make sure that the current level of the water softener agrees with the hardness of the water supply. Starting a programme with delay start Press repeatedly until the display shows the desired delay time (from 1 to 24 hours). [. . . ] For alarm codes not described in the table, contact an Authorised Service Centre. For the best drying performance activate the option We recommend to use rinse aid always, even in The released quantity of rinse aid is too high. Bluish layers on glasses and just the rinse aid level to a lower level. There are stains and dry wa- · The released quantity of rinse aid is not sufficient. [. . . ]